A Step-by-Step Guide by Technosats DSTV Installers
At Technosats DSTV Installers, we pride ourselves on making satellite TV setups easy and hassle-free for our customers in Pretoria North and beyond. Today, we’ll guide you through the process of setting up and activating your OpenView HD (OVHD) decoder, ensuring you enjoy a seamless viewing experience.
What You Need:
Before we begin, ensure you have the following:
OVHD Decoder
Satellite Dish (aligned to the correct satellite)
HDMI or RCA Cable
Television
Remote Control
Step 1: Connecting the Satellite Dish to Your Decoder
Position the Satellite Dish: Ensure your satellite dish is correctly positioned and aligned. The dish should face the correct direction as specified in the OVHD manual.
Connect the LNB Cable: Connect the LNB cable from your satellite dish to the “LNB IN” port on the OVHD decoder. This cable carries the signal from the dish to your decoder.
Step 2: Connecting the Decoder to Your TV
HDMI Connection: For the best picture quality, use an HDMI cable. Connect one end of the HDMI cable to the HDMI port on the OVHD decoder and the other end to an available HDMI port on your TV.
RCA Connection: If your TV doesn’t have an HDMI port, use the RCA cables. Match the colors (yellow, red, and white) from the decoder’s RCA outputs to the corresponding RCA inputs on your TV.
Step 3: Powering Up
Connect the Power Cable: Plug the power cable into the OVHD decoder and then into an electrical outlet. Switch on the decoder.
Turn on the TV: Use your TV remote to turn on the TV and select the correct input source (HDMI or AV) that you connected the decoder to.
Step 4: Initial Setup and Activation
On-Screen Setup: Once powered on, the decoder will guide you through an on-screen setup process. Follow the instructions to set your preferred language and region.
Signal Search: The decoder will automatically start searching for a signal. This process may take a few minutes. Ensure the satellite dish is properly aligned to avoid signal issues.
Step 5: Activating Your OVHD Decoder
Activation Process: To activate your decoder, you need to provide your decoder’s serial number and smartcard number (if applicable). You can activate your decoder via:
SMS: Send an SMS with your smartcard number to the OVHD activation number provided in your decoder manual.
Online: Visit the OVHD website and follow the instructions to activate your decoder online.
Call Center: Contact the OVHD call center and provide the necessary details for activation.
Step 6: Enjoy Your Channels
Channel Scan: After activation, your decoder will automatically scan for available channels. This process may take a few minutes.
Start Watching: Once the scan is complete, you’ll have access to a variety of free-to-air channels. Use your remote control to navigate and enjoy your new viewing experience.
Troubleshooting Tips
No Signal: Ensure the dish is correctly aligned and the LNB cable is securely connected.
Activation Issues: Double-check the smartcard number and serial number. Contact OVHD support if problems persist.
Poor Picture Quality: Verify the HDMI or RCA connections and ensure your TV is set to the correct input source.
Need Help?
Setting up and activating your OVHD decoder should be straightforward, but if you encounter any issues or need professional assistance, don’t hesitate to contact us at Technosats DSTV Installers. We offer comprehensive installation and troubleshooting services to ensure you get the most out of your satellite TV experience.